PRO Archives - m4wd.pro | Mini 4WD Singapore

TAMIYA 15357 – Mini 4WD Pro FRP Side Extension Roller Mount

Robert — Fri, 01 Aug 2025 03:49:22 +0000

Overview of Tamiya 15357 – Mini 4WD PRO FRP Side Extension Roller Mount

The Tamiya 15357 Mini 4WD PRO FRP Side Extension Roller Mount is a specialized component engineered to extend the width of your Mini 4WD PRO MS Chassis up to approximately 104mm. This increased width offers enhanced stability, minimizing power loss during turns, making it an essential part for competitive racing enthusiasts seeking precision and control on the track.

Compatibility and Installation

This FRP side extension roller mount is compatible with a range of chassis types, including:

Direct Use: Mini 4WD PRO MS chassis, Mini 4WD VS, Super X, Super TZ-X
With Item 15242 FRP Front Plate: Super-TZ, Super-1

Installation is straightforward, requiring minimal modification when paired with the appropriate chassis and additional parts where necessary. This flexibility allows racers to tailor their setups to specific track demands and racing conditions.

Racing Potential and Customization

By broadening the chassis, the Tamiya 15357 enhances cornering stability, a critical factor in high-speed racing scenarios. This makes it a valuable upgrade for those looking to optimize their vehicle’s performance on complex tracks. The mount’s design supports further customization with various rollers, tires, and dampers, providing ample opportunities for racers to fine-tune their vehicles to achieve desired handling characteristics.

The post TAMIYA 15357 – Mini 4WD Pro FRP Side Extension Roller Mount appeared first on m4wd.pro | Mini 4WD Singapore.

TAMIYA 15429 – Pro High Speed EX Gear Set (for MS Chassis/Gear Ratio 3.7:1)

Robert — Sun, 17 Mar 2024 23:45:41 +0000

Tamiya Mini 4wd Pro High Speed EX Gear Set (for MS Chassis/Gear Ratio 3.7:1)

The post TAMIYA 15429 – Pro High Speed EX Gear Set (for MS Chassis/Gear Ratio 3.7:1) appeared first on m4wd.pro | Mini 4WD Singapore.

TAMIYA 92422 – Avante MkIII Korea 25th Special Edition

Robert — Sun, 17 Mar 2024 11:43:16 +0000

Tamiya Avante MkIII Korea 25th Special Edition

Description/features:

MS chassis (Red - ABS)
Carbon reinforced FIN wheel
Red hard LP tire
Easy snap-together assembly
Separately required items: R6/AA/UM3 batteries (x2)

The post TAMIYA 92422 – Avante MkIII Korea 25th Special Edition appeared first on m4wd.pro | Mini 4WD Singapore.

TAMIYA 95232 – Carbon Reinforced N-04/T-04 Units

Robert — Sun, 17 Mar 2024 10:55:39 +0000

The Carbon Reinforced N-04/T-04 Units produced by Tamiya, is classified in Mini 4WD / Kids - Mini 4WD Spare Parts - Chassis Set.

These units are made with a highly durable carbon reinforced nylon resin. The bearing parts are made with separate parts allowing you to choose from normal tread, wide tread, and normal tread with 520 ball bearing specifications.

Description/features:

N-04 Unit x1
T-04 Unit x1
Comes with a choice of 3 types of bearing part.
Small parts for attachment included.
Compatible with MS Chassis machines.

The post TAMIYA 95232 – Carbon Reinforced N-04/T-04 Units appeared first on m4wd.pro | Mini 4WD Singapore.

TAMIYA 95485 – Festa Jaune L Green Special (Polycarbonate Body)

Robert — Sun, 17 Mar 2024 10:22:33 +0000

This assembly kit creates a Green Special version of the Festa Jaune L Mini 4WD racer. Its polycarbonate body takes the original Festa Jaune and removes the roof fin and rear wing for a lighter-weight and speedier car. The MS Chassis is the base for the model, molded in fluorescent green along with the A parts. Black fin type wheels are paired with gray small diameter low-profile tires, and dedicated clear stickers are included.

The direct drive, double-shaft motor MS Chassis features a 3-piece setup split into nose, center and tail units for easy attachment and detachment. Its 80mm wheelbase provides an advantage through corners. The chassis has a gear ratio of 3.5:1 and is fitted with 13mm plastic rollers.

Description/features:

MS chassis
Includes motor
Easy snap-together assembly
Separately required items: R6/AA/UM3 batteries (x2)

The post TAMIYA 95485 – Festa Jaune L Green Special (Polycarbonate Body) appeared first on m4wd.pro | Mini 4WD Singapore.

TAMIYA 92428 – Avante MK III Tamiya Korea 25th Anniv. SP Ver.2

Robert — Fri, 15 Mar 2024 03:01:38 +0000

Avante MK III Tamiya Korea 25th Anniv. SP Ver.2 (MS)

Description/features:

16mm Roller (White)
ABS Resin N-02 Unit (Fluorescent Yellow)
Carbon Reinforced Fin Type Wheel (Black)
ABS Resin Center Chassis (Fluorescent Yellow)
Hard Small Dia Low Profile Tire (Fluorescent Yellow w/ Lettering)
Special design stickers
Includes motor
Easy snap-together assembly
Separately required items: R6/AA/UM3 batteries (x2)

The post TAMIYA 92428 – Avante MK III Tamiya Korea 25th Anniv. SP Ver.2 appeared first on m4wd.pro | Mini 4WD Singapore.

TAMIYA 15433 – Mach Dash Pro Motor

Robert — Sun, 10 Mar 2024 09:27:17 +0000

This Mini 4WD PRO motor offers superb output at high RPMs and is ideal for use on high-speed circuits. Designed for use in conjunction with small diameter tires. Pinion gears are not included.

Description:

Voltage (V): 2.4 - 3.0
Torque (nM-m): 1.3 - 1.8
RPM (r/min): 20000 - 24500
Current (A): 2.6 - 3.52

Compatible chassis:

MA chassis
MS chassis

The post TAMIYA 15433 – Mach Dash Pro Motor appeared first on m4wd.pro | Mini 4WD Singapore.

TAMIYA 95486 – Raikiri Pink Special (Polycarbonate Body)

Robert — Sun, 10 Mar 2024 09:27:16 +0000

This kit creates a Pink Special version of the exciting Mini 4WD racer named Raikiri, originally conceived by Japanese designer Kota Nezu of znug design. The flowing Raikiri body is molded in polycarbonate: not only durable but also lightweight, it promises to contribute to a faster car. As its name suggests, pink is the predominant theme in the car's color scheme, with fluorescent pink plastic chassis and A parts, while Y-spoke wheels are molded in black and paired with gray low-profile tires. Stickers are included in the kit to decorate the body with colored graphics, headlights and more.

The direct drive, double-shaft motor MS Chassis features a three-piece setup split into nose, center and tail units for easy attachment and detachment, with batteries flanking the central motor for superior balance in addition to the low center of gravity. The chassis has a gear ratio of 3.5:1 and is fitted with 13mm plastic rollers.

The post TAMIYA 95486 – Raikiri Pink Special (Polycarbonate Body) appeared first on m4wd.pro | Mini 4WD Singapore.